Click on a Model to View Accessories
138-106865The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
119-101313120VAC Metal Oxide Varistors (lot of 10). Used to improve noise immunity by reducing spikes caused by load switching (120VAC Loads). |
119-102292220VAC Metal Oxide Varistors (lot of 10). Used to improve noise immunity by reducing spikes caused by load switching (220VAC Loads). |
|
ICM-HP-01The ICM-HP-01 is a hardware mounting packet for mounting the Enhanced Baby Bear Open-board Programmable Logic Controllers to a subplate. |
109-100924Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
138-106865The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
119-101313120VAC Metal Oxide Varistors (lot of 10). Used to improve noise immunity by reducing spikes caused by load switching (120VAC Loads). |
119-102292220VAC Metal Oxide Varistors (lot of 10). Used to improve noise immunity by reducing spikes caused by load switching (220VAC Loads). |
|
ICM-HP-01The ICM-HP-01 is a hardware mounting packet for mounting the Enhanced Baby Bear Open-board Programmable Logic Controllers to a subplate. |
109-100924Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
138-106865The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
119-101313120VAC Metal Oxide Varistors (lot of 10). Used to improve noise immunity by reducing spikes caused by load switching (120VAC Loads). |
119-102292220VAC Metal Oxide Varistors (lot of 10). Used to improve noise immunity by reducing spikes caused by load switching (220VAC Loads). |
|
ICM-HP-01The ICM-HP-01 is a hardware mounting packet for mounting the Enhanced Baby Bear Open-board Programmable Logic Controllers to a subplate. |
109-100924Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
138-106865The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
119-101313120VAC Metal Oxide Varistors (lot of 10). Used to improve noise immunity by reducing spikes caused by load switching (120VAC Loads). |
119-102292220VAC Metal Oxide Varistors (lot of 10). Used to improve noise immunity by reducing spikes caused by load switching (220VAC Loads). |
|
ICM-HP-01The ICM-HP-01 is a hardware mounting packet for mounting the Enhanced Baby Bear Open-board Programmable Logic Controllers to a subplate. |
ICM-HP-08The ICM-HP-08 is a hardware mounting packet for mounting the ICM-EBB-IO-54RE-P Expander to a subplate and then stack-mount the Enhanced Baby Bear Programmable Logic Controller (ICM-EBB-XXX) to the expander. |
|
PIMS-CA-6Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-100924Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
109-101154Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
ICM-EBB-IO-54RE-PThe ICM-EBB-IO-54RE-P Enhanced Baby Bear Digital I/O Expansion Board is an I/O Expansion Board for the Enhanced Baby Bear family of Programmable Logic Controllers (PLCs). The ICM-EBB-IO-54RE-P stack-mounts to the Enhanced Baby Bear Controller and provides an additional 8 inputs rated 5-24VDC and 8 Relay Outputs. Relays are factory installed. Requires the Enhanced Baby Bear PLC to have I/O Expansion Port for Enhanced Baby Bear Digital I/O Expander. |
138-106865The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
119-101313120VAC Metal Oxide Varistors (lot of 10). Used to improve noise immunity by reducing spikes caused by load switching (120VAC Loads). |
119-102292220VAC Metal Oxide Varistors (lot of 10). Used to improve noise immunity by reducing spikes caused by load switching (220VAC Loads). |
|
ICM-HP-01The ICM-HP-01 is a hardware mounting packet for mounting the Enhanced Baby Bear Open-board Programmable Logic Controllers to a subplate. |
109-100924Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01PHigh Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02PHigh Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03PHigh DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06PHigh Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07PHigh Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10PHigh Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13PHigh Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19PHigh Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20PHigh Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23PHigh Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
138-106865The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
119-101313120VAC Metal Oxide Varistors (lot of 10). Used to improve noise immunity by reducing spikes caused by load switching (120VAC Loads). |
119-102292220VAC Metal Oxide Varistors (lot of 10). Used to improve noise immunity by reducing spikes caused by load switching (220VAC Loads). |
|
ICM-HP-01The ICM-HP-01 is a hardware mounting packet for mounting the Enhanced Baby Bear Open-board Programmable Logic Controllers to a subplate. |
ICM-HP-08The ICM-HP-08 is a hardware mounting packet for mounting the ICM-EBB-IO-54RE-P Expander to a subplate and then stack-mount the Enhanced Baby Bear Programmable Logic Controller (ICM-EBB-XXX) to the expander. |
|
PIMS-CA-6Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-100924Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
109-101154Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
ICM-EBB-IO-54RE-PThe ICM-EBB-IO-54RE-P Enhanced Baby Bear Digital I/O Expansion Board is an I/O Expansion Board for the Enhanced Baby Bear family of Programmable Logic Controllers (PLCs). The ICM-EBB-IO-54RE-P stack-mounts to the Enhanced Baby Bear Controller and provides an additional 8 inputs rated 5-24VDC and 8 Relay Outputs. Relays are factory installed. Requires the Enhanced Baby Bear PLC to have I/O Expansion Port for Enhanced Baby Bear Digital I/O Expander. |
ICM-EBB-RS232Add-on RS232 serial port for the Enhanced Baby Bear PLC. Plugs into and mounts to the Enhanced Baby Bear and provides an RS232 serial port with a 9-pin 'D' male. |
|
ICM-EBB-RS485Add-on RS485 serial port for the Enhanced Baby Bear PLC. Plugs into and mounts to the Enhanced Baby Bear and provides an RS485 serial port with a 9-pin 'D' female. |
ICM-EBB-RS422Add-on RS422 serial port for the Enhanced Baby Bear PLC. Plugs into and mounts to the Enhanced Baby Bear and provides an RS422 serial port with a 9-pin 'D' female. |
|
OPTICFGTOOL-01The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
138-106865The 138-106865 is a USB to RS232 Serial Adaptor/Converter cable. Ideal for today's needs where many computers are no longer designed with Serial Ports, this adaptor is the recommended model for use with Divelbiss controller products. It is based on the FTDI chipset. |
126-102860Null Modem Programming cable, RS232. 6ft in length and connects 9-pin 'D' female to 9-pin 'D' female. |
|
119-101313120VAC Metal Oxide Varistors (lot of 10). Used to improve noise immunity by reducing spikes caused by load switching (120VAC Loads). |
119-102292220VAC Metal Oxide Varistors (lot of 10). Used to improve noise immunity by reducing spikes caused by load switching (220VAC Loads). |
|
ICM-HP-01The ICM-HP-01 is a hardware mounting packet for mounting the Enhanced Baby Bear Open-board Programmable Logic Controllers to a subplate. |
109-100924Transformer for Programmable Logic Controller (PLC) input power. 230VAC Primary to 10VAC secondary @ 6 Amps maximum. |
|
PIMS-CA-6Input power cable assembly. Provides flying leads to 3-pin connector for the Enhanced Baby Bear (ICM-EBB-XXX) and PCS Controllers. |
109-101153Transformer for Programmable Logic Controller (PLC) input power. 115VAC Primary to 10VAC secondary @ 2 Amps maximum. |
|
109-101154Transformer for Programmable Logic Controller (PLC) input power. 24VAC Primary to 10VAC secondary @ 2 Amps maximum. |
ICM-HDIO-01PHigh Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-01P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-02PHigh Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-02P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-03PHigh DensityDigital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-03P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-04PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has an isolated + and - terminal. Din-rail mounted, the ICM-HDIO-04P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-06PHigh Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC and 16 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-06P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-07PHigh Density Digital I/O Expansion Board with 16 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-07P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-08PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-08P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-09PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-09P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-10PHigh Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 10-32VDC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-10P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-11PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-11P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-12PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-12P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-13PHigh Density Digital I/O Expansion Board with 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-13P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-14PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-14P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-15PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC. Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-15P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-16PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Fused Digital Outputs rated 24-115VAC @ 1 Amp. Each input and output is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-16P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-17PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 8-32VDC and 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-17P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-19PHigh Density Digital I/O Expansion Board with 8 Relay Sockets (uses 125-101183 5 Amp relays, not included). Din-rail mounted, the ICM-HDIO-19P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-20PHigh Density Digital I/O Expansion Board with 8 plug-in slots for Opto-22 type 5VDC logic modules. Eight total slots provided inputs and outputs in any combination up to 8 total I/O points. Modules are available in many configurations and voltages. ICM-HDIO-20P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-22PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 115VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-22P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-23PHigh Density Digital I/O Expansion Board with 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Din-rail mounted, the ICM-HDIO-23P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
ICM-HDIO-24PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 24VAC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-24P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
|
ICM-HDIO-25PHigh Density Digital I/O Expansion Board with 8 Digital Inputs rated 10-32VDC and 8 Relay Sockets (uses ICM-RE-03 10 Amp Form C relays, not included). Each input is optically isolated and has commoned (-) terminals. Din-rail mounted, the ICM-HDIO-25P connects to Divelbiss PLCs and Controllers using the High Density I/O Port using cable sets. |
OPTICFGTOOL-01The OPTICFGTOOL-01 is the OptiCAN Configuration Tool Professional. This includes the software, USB-CAN interface and required cabling. The OPTICFGTOOL-01 allows the use of OptiCAN Networks of more than 10 nodes (drops) as well as providing additional software tools for diagnosing network issues. |
|
ICM-EBB-RS232Add-on RS232 serial port for the Enhanced Baby Bear PLC. Plugs into and mounts to the Enhanced Baby Bear and provides an RS232 serial port with a 9-pin 'D' male. |
ICM-EBB-RS485Add-on RS485 serial port for the Enhanced Baby Bear PLC. Plugs into and mounts to the Enhanced Baby Bear and provides an RS485 serial port with a 9-pin 'D' female. |
|
ICM-EBB-RS422Add-on RS422 serial port for the Enhanced Baby Bear PLC. Plugs into and mounts to the Enhanced Baby Bear and provides an RS422 serial port with a 9-pin 'D' female. |